Board ID: XEPI-232 (16/PLUS)(RMT)
Version: 1.2.3
Serial: FD9A19130000
Probe Voltage: 12583mV
Last Response: 054 Server Error: "FTP_OPEN_FAILED 230-User landmark@enviro..." [Connect Server]
Connection Details:
001 Initializing Interface: [Connect Modem]
 Waiting Network
Initialize Modem
MSG:Press ESC to enter Config Mode...
MSG:ETM9800 SYSTEM START SW#:SW981N051R02 20080821 CT0204
MSG:Searching for device..........
MSG:Device detected on port 0
MSG:HC25/28(MdmNet) serial device detected
MSG:SERIAL DEVICE READY
Matched 'MSG:SERIAL DEVICE READY'
AT&D2
OK
Matched 'OK'
AT&C1
OK
Matched 'OK'
AT^SLED=1
OK
Matched 'OK'
AT+CSQ
+CSQ: 4,99
OK
Matched 'OK'
Connect
ATS0=0
OK
Matched 'OK'
ATD*99***1#
CONNECT
Matched 'CONNECT*'
Connected
001 Initializing Interface: [Connect Init]
 Initialise TCP/IP Stack
001 Initializing Interface: [Start PPP]
 Connecting
001 Initializing Interface: [PPP Connected]
 Connected 10.188.56.92
002 Initializing FTP: [Resolve Server]
 DNS Lookup enviroscanplus.com
002 Initializing FTP: [Connect Server]
 Open Connection to enviroscanplus.com
 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
 331 User landmark@enviroscanplus.com OK. Password required
 230-User landmark@enviroscanplus.com has group access to:  enviros   
002 Initializing FTP: [CWD]
 250 OK. Current directory is /esp/LMK4
002 Initializing FTP: [SET Binary Mode]
 200 TYPE is now 8-bit binary
003 Transferring
004 Uploading to Server
054 Server Error: [Upload File]
 FTP_CMD_FAILED PORT 10,188,56,92,16,222
002 Initializing FTP: [Connect Server]
 Open Connection to enviroscanplus.com
 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
 331 User landmark@enviroscanplus.com OK. Password required
054 Server Error: 
 FTP_OPEN_FAILED 230-User landmark@enviroscanplus.com has group access to:  enviros   
Disconnect
NO CARRIER
Matched 'NO CARRIER'
AT^SMSO
OK
Matched 'OK'
Telemetry Initialize
MSG:Press ESC to enter Config Mode...
MSG:ETM9800 SYSTEM START SW#:SW981N051R02 20080821 CT0204
MSG:Searching for device..........
MSG:Device detected on port 0
MSG:HC25/28(MdmNet) serial device detected
MSG:SERIAL DEVICE READY
Matched 'MSG:SERIAL DEVICE READY'
AT&D2
OK
Matched 'OK'
AT&C1
OK
Matched 'OK'
AT^SLED=1
OK
Matched 'OK'
AT+CSQ
+CSQ: 4,99
OK
Matched 'OK'
Telemetry Enable
ATS0=1
OK
Matched 'OK'
Telemetry Disable
ATH
OK
Matched 'OK'
ATS0=0
OK
Matched 'OK'
AT^SMSO
OK
Matched 'OK'
001 Initializing Interface
001 Initializing Interface: [Idle]
 Process URL